Hi Experts,
There is a propagation delay spec of internal comparator as shown in below.
eCOMP0
eCOMP1
Do you have any data with Overdrive = 5mV and 10mV at CPMSEL = 1 ?
Regards,
Uchikoshi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Experts,
There is a propagation delay spec of internal comparator as shown in below.
eCOMP0
eCOMP1
Do you have any data with Overdrive = 5mV and 10mV at CPMSEL = 1 ?
Regards,
Uchikoshi
Hello Uchikoshi,
Typically, if the spec isn't listed in the datasheet, there is probably no data and it is not tested in production. There may be some initial characterization data, but not sure that would be helpful, especially if the process has changed over time. But I can ask.
Hi Dennis,
Thank you for your effort. Please let us share if we have any reference data for customer.
Regards,
Uchikoshi
Hello Uchikoshi,
I apologize for the delay in your answer.
According to the datasheet, the programmable hysteresis mode does not have a 5mv setting. Only 10mv, 20mv, 30mv and of course, disable. I think I tracked down a person who might have this data. He is in Shanghai so it might take a day or two for a response.
Hello Uchikoshi,
Our product and test engineer has responded and unfortunately they do not have data for either 5mV or 10mV.
**Attention** This is a public forum