following is pin usage of msp430fr2433, please check whether it is reasonable
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
following is pin usage of msp430fr2433, please check whether it is reasonable
Hi Jimmy,
Yes, if you have removed the FETs and drive the RST and TST directly with a programmer, it should be fine.
Hi Jimmy,
It's been a while since we have heard from you, so I'm going to assume you were able to move forward with your project.
I will mark this posting as RESOLVED, but if this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information.
If this thread is locked, please click the "Ask a related question" button, and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.
**Attention** This is a public forum