Hi,
I would like to know how to monitor whether DVCC has reached 3V using PMM (register setting, etc.). The system frequency is 8MHz.
Aso if you have any sample code provided by TI that corresponds to the above, please let me know.
Koki
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I would like to know how to monitor whether DVCC has reached 3V using PMM (register setting, etc.). The system frequency is 8MHz.
Aso if you have any sample code provided by TI that corresponds to the above, please let me know.
Koki
**Attention** This is a public forum