Other Parts Discussed in Thread: MSP-GANG
Use the TI MSP-GANG programmer to download the program, use the BSL mode, there are 9 blocks in the 200pcs board. The program download fails when it reaches the "verification" step; at this time, use the MSP-GANG programmer to read the program code and find that the code is empty. What is the reason for this failure? The board is the same batch of SMT, and the MCU is the same batch The specific error reported by the MSP-GANG programmer is as follows:
Executing Main Process...
.............
2 : Get Password
3 : Get Password
4 : init target
5 : Loading FBSL
6 : Starting FBSL
7 : erasing-Info
8 : erasing-Info
9 : erasing-Info
10 : erasing-Main
11 : erasing-Main
12 : erasing-Main
13 : erasing-Main
14 : erasing-Main
15 : Blank-1800
16 : Blank-1880
17 : Blank-1900
18 : Blank-4400
19 : Blank-8000
20 : Blank-10000
21 : Blank-18000
22 : Blank-20000
23 : Write-4400
24 : Write-8000
25 : Write-FFDC
26 : Write-FFE2
27 : Write-FFEA
28 : Write-FFF0
29 : Write-FFFE
30 :
ERROR 58: Verification Error
Failed
ERROR 58: Verification Error
