MSP-EXP430FR5739 FRAM_GUI.exe

Stefan,

We are in the process of updating the web product folder as we speak.

Please check back next week for the updated firmware and document.

I've attached a preliminary version in this post: http://e2e.ti.com/support/microcontrollers/msp43016-bit_ultra-low_power_mcus/f/166/t/108765.aspx

Regards,

Priya

This has, unfortunately, become the case with many experimental board offerings.  TI isn't the only one; I've received two other experimental boards with either the wrong support info or none at all.  What I wonder is why TI releases anything BEFORE a complete package is available and the website updated.  What good is it if I have to reverse engineer it before using it?

The schematic and board layout are in the user manual online (I it found yesterday).  However, all the other support files that would make it easy to move forward are not there (like the code, SCH, & BRD).

As for the product, it is anything but cheap.  My experience is that it is always quality and this one is no different.  What is lacking is the support to go along with it.  Call that "cheap" if you like, but not the product.

Hi,

have a look at this thread too: http://e2e.ti.com/support/microcontrollers/msp43016-bit_ultra-low_power_mcus/f/166/t/111150.aspx. The usres guide is online now: http://www.ti.com/litv/pdf/slau343

Usually, design files (Eagle PCB layout and schematics) follow with some delay.

Rgds
aBUGSworstnightmare

Hello all,

The source code for the user experience demo and GUI is located in the MSP-EXP430FR5739 Tool Folder, in the "Support Software" section...

However, here is a direct link --> http://www.ti.com/litv/zip/slac492

User's Guide is also located in the Tool Folder --> MSP-EXP430FR5739 Experimenter Board User's Guide

Thanks,

Adrian Fernandez