• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 78 subscribers
  • Views 170 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

MSP432 retrieve programmed hex file

MSP-EXP430FR5969: How to find the start address.

Marvin Gasis Arcangel
Genius 9005 points
Part Number: MSP-EXP430FR5969

Hi Team,

I am helping the customer to extract the program from their EVM by following this thread: (https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/692926/ccs-ccstudio-copying-code-from-microprocessor-to-computer) unfortunately, they do not know what memory locations are being used, don't know what start location and how big it is. 

Is there a way to find this? 

Thanks!

Regards,

Marvin

  • 0
    TI__Guru 60411 points

    Hi Marvin,

    Use Uniflash. You can download from the link provided, or you can run it from the cloud.

    Once you tell it what device you have, skip the programming step and go to Read Memory.  I will read everything and show you the code/data and locations.

  • +1 in reply to Dennis Lehman
    TI__Guru 60411 points

    Hi Marvin,

    It's been a while since we have heard from you, so I'm going to assume you were able to move forward with your project.
    I will mark this posting as RESOLVED, but if this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information.
    If this thread is locked, please click the "Ask a related question" button, and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

**Attention** This is a public forum