MSP430FR5043: LEACMD__MOVELONGLIST not documented/implemented.

Jamal Bouajjaj

Part Number: MSP430FR5043
Other Parts Discussed in Thread: MSP-DSPLIB

Hello,

The LEA does have support to move a list with the LEACMD__MOVELONGLIST command according to the LEA's documentation, but there is no documentation regarding setting up the LEA's registers to do so, neither in the DSPLib library nor in a struct.

Is there any documentation/code/anything that describes how to setup the LEA for this operation.

Thanks,

over 1 year ago

+1 Dennis Lehman over 1 year ago

TI__Guru 61821 points

Hi Jamal,

Referring to your other posting, this function also may appear in the following documents, but for some reason was not implemented in the MSP-DSPLIB.

Low-Energy Accelerator (LEA) Commands : https://www.ti.com/lit/ug/slau850/slau850.pdf
Low-Energy Accelerator (LEA) Common Parameter Blocks : https://www.ti.com/lit/ug/slau852/slau852.pdf
Low-Energy Accelerator (LEA) Registers : https://www.ti.com/lit/ug/slau853/slau853.pdf

There are no plans to update the MSP-DSPLIB.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR5043: LEACMD__MOVELONGLIST not documented/implemented.