• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 78 subscribers
  • Views 134 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

MSP430F5224: Evaluation boards

MSP-TS430RGC64C: Regarding the implementation of Q2 clock(300-8219-1-ND)

O.H
Genius 5595 points
Part Number: MSP-TS430RGC64C

Hi experts,

My customer is planning to implement and evaluate a crystal oscillator (300-8219-1-ND) for Q2 clock on an MSP-TS430RGC64C.
However, on the evaluation board, Q2 is a through-hole and does not appear to be mountable.

Could you tell me how to mount the SMD type?
If SMD type mounting is not possible, could you give me another recommendation for possible mounting?

We refer to ”P116:Table B-28. MSP-TS430RGC64C Bill of Materials” in "MSP430 Hardware Tools User's Guide (Rev. AH)".
The 300-8219-1-ND is listed as Supplier No. for Q2.
We are confused because 300-8219-1-ND is an SMD 4-pin.

Best regards,
O.H

  • +1
    TI__Guru 56685 points

    Hello O.H.,

    That part number is an error on the BOM. Unfortunately, I cannot get the correct part number for this Xtal.  As you mentioned, since what's on the board is through hole type, you would not be able to mount an SMD crystal to this board. A custom board would need to be made to accomodate an SMD crystal. 

  • 0 in reply to Jace H
    Genius 5595 points

    Hello Jace H,

    Thank you for your reply. I understood. 

    Proceed in the form of using a  through hole type product in reference to an oscillator used on another target board.

    Best regards,
    O.H

**Attention** This is a public forum