Tool/software:
Hi forum,
had tried for make a perfect adc capture graph...but i didnt got for msp430fr6043 for reflective tube of 200khz....here attached my parameters ..pls help me ,ske an perfect adc capture graph
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi forum,
had tried for make a perfect adc capture graph...but i didnt got for msp430fr6043 for reflective tube of 200khz....here attached my parameters ..pls help me ,ske an perfect adc capture graph
where i got adc graph as...with air flow of 7000 rpm
Hi,
Like in the former post, there are noise in the ADC capture. This noise is not related to the parameter setting. It is coming from outside the MCU.
Check the power supply side, transducer side. Shield the transducer and pipe with a metal case, and connect that metal case to the board GND.
Best regards,
Cash Hao
**Attention** This is a public forum