Tool/software:
Hello forum ,
now getting graph for with air flow 7000 rpm as
where my configuration as
pls correct me for an error
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hello forum ,
now getting graph for with air flow 7000 rpm as
where my configuration as
pls correct me for an error
Hi,
What is the issue in this post. I find the ADC capture is much better now.
If you considering the dTOF is a negative data. You can consider switch the transducers or changing USS_SEQUENCE_SELECTION to USS_measurement_capture_sequence_ch1_ch0 in the software.
Best regards,
Cash Hao
in where i can find these parameters
USS_SEQUENCE_SELECTION to USS_measurement_capture_sequence_ch1_ch0 in the software in code composer
Hi,
In your figure it is set as CH0_CH1, you can change to CH1_CH0 to convert the negative dTOF to a positive one.
Best regards,
Cash Hao
**Attention** This is a public forum