Tool/software:
Dear Engineers,
In the CCS software there is a part which is called Ultrasound sensing academy related to MSP430, in one of the parts it is mentioned that it is best to put the supply on EXT, which is a battery to reduce the noise. They suggested to connect 3.3 V as the power to the system.
In our finalize design we want to apply a long-life battery as the supply voltage, but the issue is that the voltage of such batteries is 3.6 V not 3.3 V, would you please let me know if we still can connected 3.6 V directly to MSP430FR6047?
The recommend voltage is as follows for MSP430FR6047:
Best regards,
Behnam,