Other Parts Discussed in Thread: MSP-EXP430FR2311, CAPTIVATE-PGMR, MSP430FR2633
Tool/software:
It doesn't work as the sample software suggests. Please tell me how to get it to work.
1: I'm using CAPTIVATE-PHONE. (Not BSWP. This is different from the sample.)
2: I'm looking at CapTIvate Technology Guide1.83.00.08.
3: I'm trying Software Library -> Advanced Module -> Hostprocessor Communication Examples.
4: When I sent 0x0Ah, 0x0h, 0x0h from MSP-EXP430FR2311, there was no ACK signal for the second 0x0h.
4-1: There is an ACK signal for 0x0Ah and 0x0h from the start.
4-2: It's the same before the last ACK in Fig.246.
5: I assume there is some kind of abnormality on the CAPTIVATE-PGMR HID side, which is why there is no ACK.
6: Please tell me how to satisfy Fig.247 REGISTER_I2C Logic Read(Zoom).