Hi all.
I have:
1. msp-ts430rgc64c.
2. msp430f5256.
3. licensed CCS v. 5.5.0.00077
4. MSP-FET430UIF
For MSP-TS430RGC64C I did:
- insert msp430f5256
- close JP3 to “int” state
- close JP4, i.e. DVCC = DVIO
- other jumpers setup by default
Сreate a assemble-only project for msp430f5256. In attached .doc file is described how I did this.0118.msp430f5256.doc
When I try to debug, programm count ( PC ) is incorrect, i.e. it is 0x000004 instead of 0x010004.
How to fix it? And why PC is incorrect?