Programmer for MSP430F47197 Microcontroller

RAVI PITHADIA

Prodigy 10 points

Other Parts Discussed in Thread: MSP430F47197

Dear All,

Which programmer tools are available to program MSP430F47197 MCU ?

over 8 years ago

0 Vaibhav Srivastava over 8 years ago

Expert 1285 points

You can use the ez-FET emulator provided on any MSP430 Launchpad Board. This onboard emulator can be used by removing the jumpers & connecting to your MSP430F47197 Microcontroller. Another option is to use MSP-FET Programmer & Debugger.

Regards,

Vaibhav

0 zrno soli over 8 years ago in reply to Vaibhav Srivastava

Guru 33653 points

Vaibhav Srivastava said:

You can use the ez-FET emulator provided on any MSP430 Launchpad Board. This onboard emulator can be used by removing the jumpers & connecting to your MSP430F47197 Microcontroller. Another option is to use MSP-FET Programmer & Debugger.

MSP430F47197 don't support SBW interface, and it is not possible to use it with SBW tools (ez-FET, LP). Only device from MSP430F4xx family with SBW is MSP430F41x2.

0 Vaibhav Srivastava over 8 years ago in reply to zrno soli

Expert 1285 points

My apologies. I didn't know that there is an MSP430 family which doesn't support SBW.

Dear Ravi, please refer to the "DEVELOPMENT TOOL SUPPORT" section in the MCU Datasheet for recommended programming & debugging hardware options.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

Programmer for MSP430F47197 Microcontroller