hi,
as the title, due to some reason, when my MSP430F5500 get into USB BSL, my MSP430's DVCC will be 2.5V, and the maximum current might be 10mA,
is it safe for my design while get into USB BSL mode?
below picture is the concept of my diagram.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hi,
as the title, due to some reason, when my MSP430F5500 get into USB BSL, my MSP430's DVCC will be 2.5V, and the maximum current might be 10mA,
is it safe for my design while get into USB BSL mode?
below picture is the concept of my diagram.
**Attention** This is a public forum