MSP430FR5729: Infield firmware Update

4944909

Prodigy 140 points

Part Number: MSP430FR5729

I am working on MSP430FR5729. I want to do “Infield firmware update” programming for MSP430FR5729.

I would like to request to provide relevant Documents and Boot loader Programmer Package for it.

over 6 years ago

0 Ryan Brown1 over 6 years ago

TI__Guru**** 202046 points

Please refer to the following resources:

MSP430FR57xx BSL User's Guide (SLAU550): www.ti.com/.../slau550e.pdf
MSPBoot (SLAA600): www.ti.com/.../slaa600b.pdf
Over-the-Air (OTA) Update With the MSP430FR57xx (SLAA511): www.ti.com/.../slaa511a.pdf
Secure In-Field Firmware Updates for MSP MCUs (SLAA682): www.ti.com/.../slaa682.pdf

Regards,
Ryan

0 4944909 over 6 years ago in reply to Ryan Brown1

Prodigy 140 points

Respected sir,

I would like to thank you for replying. But I want to Infield firmware Update using UART not I2c.

If you provide any UART based code for Infield firmware Update in MSP430FR5729, than it would be more helpful to me.

Regards,

0 Ryan Brown1 over 6 years ago in reply to 4944909

TI__Guru**** 202046 points

The MSP430FR572x has a built-in hardware UART BSL (SLAU550), if you desire a custom BSL solution using UART then you will need to modify the MSPBoot examples.

Regards,
Ryan

0 4944909 over 6 years ago in reply to Ryan Brown1

Prodigy 140 points

thank you for guiding.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR5729: Infield firmware Update