Other Parts Discussed in Thread: MSP430F5529
Tool/software: TI C/C++ Compiler
Hi,
I'm testing MSPBoot code for msp430f5659.
I succeeded downloading application code by mspboot.
But, when i use usci_b1 I2C and , my code was no response.
I think the ISR vector mapping is correct.
Other ISR like DMA_ISR, P3_ISR etc. is working.
Here is my linker file.
Is there anything else I should set up?
vector file : vector file.zip
mspboot : F5659_spi MSPBoot.zip
Thanks,
Regards
Youngjun