• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 78 subscribers
  • Views 355 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS / MSP432P401R： When MSP432 uses the XDS100V emulator simulation, it uses the official development board, prompting the error Unable access to the DAP

user4336030
Prodigy 210 points

Part Number: MSP432P401R

Tool/software: Code Composer Studio

When MSP432 uses the XDS100V emulator simulation, it uses the official development board, prompting the error Unable access to the DAP

  • 0
    TI__Guru**** 244380 points
    Hello User

    Could you please share the Target Configuration File and the setup that you are using to connect the MSP432P401R and XDS100 emulator? Also some pictures of the setup or the process that you are using and actual error message at different steps of the process will be very useful
  • 0
    TI__Guru**** 244380 points
    Any update on the thread? If the issue is resolved then can you please update the thread with the resolution. I am tentatively closing the thread, but in case you have further updates or the issue is not resolved you may re-open the thread

**Attention** This is a public forum