MSP432P401R: Over the Air Download / Firmware Update with ESP wifi module

Phuong Hoang

Part Number: MSP432P401R

Hi all,

My systerm is working with MSP432, ESP12s and Tiva4C129.

PC app <=(Wi-Fi)=> ESP12s <=(UART/SPI)=>[MSP432]<== TivaC <==USB.

My questions to be discussed is : possible if I want to Over the Air Download / Firmware Update MSP432 throught ESP12s and how I can do it!

Thank you for your time and willingness to share your answer and experience related to this topic.

Regards,

over 6 years ago

0 Sai Reddy over 6 years ago

TI__Mastermind 22560 points

Hello Phuong,

As far as I understand the ESP12s seems to be a Wi-Fi module that can interface with the MSP432P4 device over UART or SPI.

TI has a Wi-Fi module, SimpleLink CC3120, that can be used to perform the same role as ESP12s. For development you can use SimpleLink CC3120BOOST.

To enable easy code development we have created a SimpleLink SDK Wi-Fi Plugin, which already has an OTA update example that you are requesting.

You can either start using the SimpleLink CC3120BOOST to get started with the development, or use the existing example as a guide to build the OTA update exampl for the hardware that you want to use.

Hope this helps!

Thanks,

Sai

0 Phuong Hoang over 6 years ago in reply to Sai Reddy

Prodigy 170 points

thank you so much!

**Attention** This is a public forum

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP432P401R: Over the Air Download / Firmware Update with ESP wifi module