This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F5324: Can MSP430F5324 blown jtag fuse be restored?

Part Number: MSP430F5324
Other Parts Discussed in Thread: MSP-GANG


Hi:

I'm involved in mass production of a product where a board with a MSP430F5324 is used, there are some failures, and I tried to install an elprotronic flashpro430, in test equipment using my laptop and read the device:

So was looking into my programmer options and found this:

Unfortunately fixture used to program doesn't have access to BSL pins on board.

So the question is, can I just by accessing BSL test points on board restore Fuse trough that programmer? We also have here a dataman pro2 programmer if I buy a socket would I be able to restore fuse on devices?

By the way, using a brand new device I was able to access the MSP430F5324:

I don't have a debugger to run code or know how to :(

Saludos,

Ricardo P.

**Attention** This is a public forum