• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 78 subscribers
  • Views 227 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F5329: About disabling the UCS Fail-Safe Operation

UNA
Mastermind 7980 points
Part Number: MSP430F5329

Hi,

I have a question about UCS module for MSP430F5329.

Is there a way to prevent the clock source from switching automatically when an oscillator failure occurs?
In other words, Can I disable Fail-Safe Operation of UCS?
I want to disable the UCS Fail-Safe feature independently of the status register control bits (SCG0, SCG1, OSCOFF, and CPUOFF) settings.

Best Regards,
H.U

  • 0
    TI__Genius 12315 points
    Sorry, the UCS Fail-Safe can't be disabled. In other words, if the clock source switching automatically when an oscillator failure occurs is prevented, then device will run abnormally. What's the purpose to disable this feature?

**Attention** This is a public forum