This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, I've some problems about connecting the MSP-EXP430G2ET with RF430FRL152HEVM GUI.
I've used UniFlash to insert the TRF7970out file to the MSP-EXP430G2ET, and when RF430FRL152HEVM above the TRF7970ABP the light will change. However, I still cannot connect the MSP-EXP430G2ET
to GUI when I press the connect button. Can someone help me? Thank you very much.
Hi Patrick,
You can choose the communication COM interface instead of Auto Connect, and you need to place the RF430FRL152H near the TRF7970 EVM board for normal NFC communication.
Best Regards
Johnson
Hi, no matter I chose COM 3 or 4 (from my PC) it always cannot connect. I have already put the RF430FRL152H near TRF7970 like the pic below.
Are there any other problem that I didn't concern? I think I have successfully insert the firmware because the light will change when I put RF430FRL152H near the 7970 Thank you very much.
Yes, I've already switched them all and follow all the instructions in EVM user guide. However, it still don't work. I'm wondering if it is because my GUI version isn't capable with MSPEXP430G2ET board? I couldn't find an option for this board, only MSP430G2553 this option.
Hi Patrick,
MSP-EXP430G2ET is G2553, so it is not the problem you described.
Please follow this data to test again:
http://www.ti.com/lit/ml/slab068/slab068.pdf?keyMatch=TRF7970ABP&tisearch=Search-EN-everything
Best Regards
Johnson
Hi Patrick,
I don not found any problem in your lanuchpad, maybe you can update MSP-FET firmware or MSP-FET driver and try again.
Best Regards
Johnson
**Attention** This is a public forum