MSP430FR4133: BOOST-IR Infrared (IR) BoosterPack IR Receiver

ram_v

Part Number: MSP430FR4133

Dear TI Engineers;

Recently, I have purchased the Infrared (IR) BoosterPack Plug-in Module. I want to decode the IR signal value (remote available in the market) only with three key +,- and on-off. My aim to develop the IR receiver using MSP430FR microcontroller.

How can implement this using the example program IR_Emitter_and_Receiver

Regards

ajeet

over 4 years ago

0 Cash Hao11 over 4 years ago

TI__Mastermind 31095 points

Hi Ajeet,

Have you read this guide? https://www.ti.com/lit/ug/slau598a/slau598a.pdf?ts=1594178425722

Best regards,

Cash Hao

0 ram_v over 4 years ago in reply to Cash Hao11

Intellectual 300 points

Hi Hao,

I have read all related documents/guide/manual, but not found. Application documents do not provide sufficient information for decode the IR signal.

Regards

0 Cash Hao11 over 4 years ago in reply to ram_v

TI__Mastermind 31095 points

Hi Ajeet,

Well, I will leave this threads here for one week and see if there is any decoding IR signal experts can help.

Best regards,

Cash Hao

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR4133: BOOST-IR Infrared (IR) BoosterPack IR Receiver