Hi,
The datasheet only shows input threshold voltage for 2V and 3V cases.
But I would like to know input threshold voltage for the supply voltage range.'
For example, MSP430G24x5 datasheet shows this. (0.45VCC, 0.75VCC)
I ask for data like this.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
The datasheet only shows input threshold voltage for 2V and 3V cases.
But I would like to know input threshold voltage for the supply voltage range.'
For example, MSP430G24x5 datasheet shows this. (0.45VCC, 0.75VCC)
I ask for data like this.
Hi, Please find the digital input voltage spec table in MSP430FR21xx, MSP430FR2000 Mixed-Signal Microcontrollers datasheet (Rev. D)
this is the similar parameter with G2x53's
Hi,
Yes, It is similar.
But It doesn't include parameter of all supply voltage range.
What is the value below supply voltage range (VCC) ?
1. From 1.8V to 2V :
2. From 2V to 3V
3. From 3V to 3.6V:
Hi xiaodong,
Could you give them the answer? they need official data from TI to start MP.
they need this data for all operating area. not only on 2V and 3V.
Best Regards,
Ted
Hi Ted
Since we are discussing this topic through mail. I will close this thread. Thanks!
**Attention** This is a public forum