BOOSTXL-SENSORS: can be coded with Arduino nano

Art Mecina

Part Number: BOOSTXL-SENSORS

Hello Guys,

Good day.

Is BOOSTXL-SENSORS compatible with Arduino nano?

BOOSTXL-SENSORS is the replacement to the old BOOSTXL-SENSHUB. Does this mean the BOOSTXL-SENSHUB is compatible with Arduino nano too and that the sample code for onw will work on the other directly?

Thanks in advance!

Art

over 3 years ago

0 Johnson He over 3 years ago

TI__Mastermind 28426 points

Hi Art,

Which Arduino nano? Maybe you can use this tools to check if their pin are compatible.

https://dev.ti.com/bpchecker/

Best Regards

Johnson

0 Bruce McKenney47378 over 3 years ago

Guru 91390 points

The Arduino Nano that I know about (from Arduino) runs at 5V, and so is incompatible with the BOOSTXL-SENSORS [Ref BP UG (SLAU666B) Fig 3].

Energia provides the Arduino software environment on an MSP430 (and some other TI devices). Launchpads are pretty cheap. Johnson's link can help identify which Launchpads are compatible.

0 Art Mecina over 3 years ago in reply to Bruce McKenney47378

TI__Genius 16585 points

Thanks Guys!

How about the older BOOSTXL-SENSHUB is it not compatible with Arduino nano too?

Art

0 Bruce McKenney47378 over 3 years ago in reply to Art Mecina

Guru 91390 points

Looking at the BOOSTXL_SENSHUB schematics [Ref UG (SPMU290) Sec 4.2] I don't see any level shifters, and e.g. the MPU-9150 is max 3.45V. Do you have reason to believe this was working?

The Arduino world is filled with variants, and I wouldn't be totally surprised if there were a 3V board that someone calls "Arduino Nano (not from Arduino)". Even so, I expect it would be the same shape/pinout as the Arduino Nano (else why call it that?), and the shape is also evidently incompatible with a Booster Pack. How compatible does it have to be?

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

BOOSTXL-SENSORS: can be coded with Arduino nano