Hi team,
Could you provide the increased supply current into VCC for Timer_A when the clock is changed from VLO to ACLK in standby mode (LPM3 With VLO) ?
Best Regards, Taki
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Could you provide the increased supply current into VCC for Timer_A when the clock is changed from VLO to ACLK in standby mode (LPM3 With VLO) ?
Best Regards, Taki
Hi Taki,
Sorry, I don't have this data. The current will be different when Timer_A in different mode, supplied by different clock source and different clock division.
I advice customer test it by themselves.
1. Current in LPM3 turn off Timer_A
2. Current in LPM3 turn on Timer_A with VLO
3. Current in LPM3 turn on Timer_A with ACLK
Eason
**Attention** This is a public forum