This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: MSP430F123
I am developing a PCB that provides isolation between the target MSP JTAG lines and the programmer ((lets say a MSP-FETU430IF). I am not sure how long the cable will be from the isolation box to the MSP being programmed so I'd like to include a signal driver to the design for signal integrity. What would you recommend for a driver? The BlowFuse voltage is high so the driver will need to accommodate this voltage.
Thanks for reading!
Don't know for what reason / why you need this. There is XStream-Iso from Elprotronic with galvanic isolation between PC and target device(s).
However, there is slaa184 MSP430 Isolated FET Interface
If you want to include fuse blow, than (one line of) interface must be able for 100mA @ 7V.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.