Tool/software: Code Composer Studio
Hello, TI's USS technical expert, I encountered the following problems during the use of EVM430-FR6047:
1. Capture the ADC and the waveform is qualified under the condition that the water inside the pipe is full and not flowing, as shown in the following figure:
2. When the water in the pipe is flowing at 50LPM, the ADC capture waveform is not qualified, as shown in the following figure:
3, Supplementary Description: When the water in the pipe flow to 5LPM, the ADC capture waveform is also qualified, I do not know where the problem?