MSP-FET: First generation or Second generation

Ryo Akashi

Part Number: MSP-FET

Hello experts,

I got question about MSP-FET generation from customer.

From "MSP debuggers use's guide", I can find the difference are CE sticker on the case or W at the end of version number.

In user's guide Figure 11, there is no CE mark. So it means first generation. is it correct?

Also, could you tell me where can we find version number?

Thanks and best regards,

Ryo Akashi

over 4 years ago

0 Ryo Akashi over 4 years ago

TI__Genius 9460 points

Hello,

Can anybody give me advice?

Thanks and best regards,

Ryo Akashi

0 Peter Spevak over 4 years ago in reply to Ryo Akashi

TI__Genius 17960 points

Dear customer,

sorry for the belated response. Due to some internal issues we had a delay in our response, but will come back to you on this tomorrow.

Best regards

Peter

0 Peter Spevak over 4 years ago in reply to Peter Spevak

TI__Genius 17960 points

Hi,

unfortunately to find out about the Revision, you need to open the case. The rubber feet need to be removed. Below them, you will find screws, which fix the housing. Opening the case will enable you looking up the number from the PCB inside.

Best regards

Peter

0 Peter Spevak over 4 years ago in reply to Peter Spevak

TI__Genius 17960 points

Hello Ryo-San,

is there anything else we can do for you on this topic? If that's the case, please let me know.

Best regards

Peter

0 Ryo Akashi over 4 years ago in reply to Peter Spevak

TI__Genius 9460 points

Hello Peter-san,

Thank you for your post and I'm very sorry for my late reply.

I understand about version number is on PCB inside of case.

Could you tell me about CE mark difference? My understanding(picture in this thread) is correct?

Thanks and best regards,

Ryo Akashi

0 Peter Spevak over 4 years ago in reply to Ryo Akashi

TI__Genius 17960 points

Hello Ryo-San,

yes, as you pointed out, according to the MSP430 debugger's User's Guide, this is how it should be

Best regards

Peter

0 Ryo Akashi over 4 years ago in reply to Peter Spevak

TI__Genius 9460 points

Hello Peter-san,

Thank you for your reply.

I got it.

Thanks and best regards,

Ryo Akashi

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP-FET: First generation or Second generation