This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

Need details for SDRAM board fabrication

Prodigy 210 points

Replies: 1

Views: 387

Hi

I am trying to get SDRAM board fabricated as given in the details of  TI website: http://www.ti.com/tool/TIDM-TM4C129XSDRAM.

I need details like Material(Specify clearly whether High Tg or Normal Tg), Impedance control (Yes/No) with tolerance , Copper finish (35 microns/70 microns/ any other), Min. Annular ring (mil), Board finish(Hot Air Leveled/ Electroless Ni-Au / Hard Gold / any other). These details are required by the PCB manufacturing team. Can anyone help me to get this data?

Regards

Arun

  • Hello Arun,

    The board may be Normal Tg, No Impedance control, HASL finish. The min annular ring is 6 mil, if I remember correctly. However this is strange that a PCB manufacturing house requires this information, as some of the aspects like annular ring they can extract from the gerber.

    Regards
    Amit

    Regards,

    Amit Ashara

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.