• State
  • Locked Locked
  • Replies 4 replies
  • Subscribers 29 subscribers
  • Views 820 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Nokia graphics LCD

Vikram Singh Bisht
Intellectual 290 points

Hey,

I have a nearly 10 year old mobile set nokia 5110i.

I planned to take out its LCD, and after a lot of care I successfully got it without damaging it!!

I found that it has 9 pins instead of 8.

I would like to know the pinout

Moreover, a sticker on its back reads out:

UG-08T02D 4850113 S130 25 08

Regards ,

Vikram

  • 0
    Guru 117850 points

    Vikram Singh Bisht said:

    I have a nearly 10 year old mobile set nokia 5110i...(seek to reclaim it's Lcd)...

    While free (via reclamation) is good - have you considered the fact that all of your pending, "time/effort/focus" may yield a, "one-time only" success?  (results should that exact Lcd not be quickly/easily/economically available for new/bulk purchase)

    Further - w/in past 10 years displays have improved (contrast, viewing angle, power demanded) thus you "miss out" on multiple benefits.

    Final caution - displays aimed @ consumer market often employ special connectors/cables - all of your handling forward must occur with extreme, gentle care.  (so easy to "fracture" the conductive traces w/in Lcd's cable)

    Today's mainstream display - while not free - enjoys the prospect of quick/easy replacement and enables you to, "Learn & code once - deploy many times!"  That (long past) Nokia display - not so much...  Perhaps this analysis warrants consideration...

  • 0 in reply to Markel Robregado
    Intellectual 290 points

    Hey,

    I need to know the function of following pins:

          pin4     DorC
      pin5     Cs
      pin6     Osc (32768Hz from external clock, not used; this lcd works fine with internal osc )
      pin8     Vout(DC/DC voltage converter)

    Does it work on SPI? What is the use of Vout and Osc in addition to the other pins I have asked?
    Do I need a Driver with this LCD?
  • 0 in reply to Vikram Singh Bisht
    Guru 117850 points

    Vikram Singh Bisht said:

    Hey,

    Pistol-shot echos loudly - cb1 office...  (this - after head-banging - fine, terra-cotta hallway - failed to achieve objective...)

    Many - not all - did use "near SPI."   Visit Sparkfun website - believe they carry very similar - except they've documentation and perhaps adapter board - raising your odds...  And - if you (finally) succeed - prepare for a, "sub-par" viewing experience...)