DRV10866: Detect locking fault

Michael Balourdas

Part Number: DRV10866

Hello,

My customer wants to be able to monitor their motor for a locked condition. Is the easiest way to do that by monitoring the FG pin and checking for a static output (basically the same way the part itself does it)? Or is there a better way?

Thanks,

Michael

over 3 years ago

+1 Matt Hein over 3 years ago

TI__Mastermind 21805 points

Hello Michael,

Monitoring the FG pin period is a simple way to implement a lock detect. DRV10866 does not have a specific fault pin to report a lock condition but it does implement lock detection internally.

You may also be able to monitor the motor current to detect when the current increases too high - this can also indicate a stall.

Thanks,

Matt

0 Matt Hein over 2 years ago in reply to Matt Hein

TI__Mastermind 21805 points

Hello Michael,

Do you need any further help on this thread?

Thanks,

Matt

0 Michael Balourdas over 2 years ago in reply to Matt Hein

TI__Expert 4965 points

No I think we're all set, thanks Matt!

0 Michael Arrant over 2 years ago in reply to Michael Balourdas

TI__Expert 3535 points

Hey Michael,

I'll close this for now. If you need anything else please click 'Ask a related question' in the top right of the screen.

Thanks,

Michael

Motor drivers

Motor drivers forum

DRV10866: Detect locking fault