Hi,
I have pulled the BRAKE input function to high but it's not working. Can you provide your email address so that I can share the schematic to you for the review.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Electrobud,
For the schematic, can you upload it to your google drive or onedrive/etc, and send us a link here in the forum?
Thanks and Best Regards,
Andrew
Hi Electrobud,
Can you confirm that nFAULT voltage on powerup is >2.2V? If not, there is a chance the MCT8316Z is entering test mode upon powerup and brake pin will not work.
Thanks,
Aaron