Hello,
Please let me know what feedback you have on the following haptic driver. I believe they are the same device; I will be doing a review in parallel!
Thanks,
Nikola
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
Please let me know what feedback you have on the following haptic driver. I believe they are the same device; I will be doing a review in parallel!
Thanks,
Nikola
Hi Nikola,
These look fine to me. Make sure the I2C lines have pull up resistors to 1.8V.
Best regards,
Jeff McPherson