MCF8316C-Q1: If I don't want to buy MCF8316AEVM how can I start the device.

Yu TianYu

Part Number: MCF8316C-Q1
Other Parts Discussed in Thread: MCF8316AEVM, , MCF8316A

Hi there,

I want to design a FOC motor controller, and I don't want to buy MCF8316AEVM ,how can I config registers of MCF8316C-Q1，

Do you have reference source code for a microcontroller，

Thanks very much。

6 months ago

+1 Joshua Horlander Cruz 6 months ago

TI__Genius 12215 points

Hello Yu,

We have an FAQ which provides example code for programing a MCx BLDC motor through I2C using the MSP-ECP430FR2355 LaunchPad: https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1246892/faq-program-mcx-bldc-motor-driver-through-i2c-using-msp430-launchpad.

The example code is made to program a MCF8316A, so the eeprom_regmap values will need to be adjusted to program the MCF8316C-Q1. Also, If you are not using a MSP430 microcontroller the code will need to be adjusted to be compatible with your microcontroller.

Regards,

Joshua

0 Yu TianYu 6 months ago in reply to Joshua Horlander Cruz

Prodigy 10 points

I got it ,

Thanks very much.

Motor drivers

Motor drivers forum

MCF8316C-Q1: If I don't want to buy MCF8316AEVM how can I start the device.