MCF8315A: Brake_pin_mode

Ivy Jin

Intellectual 2845 points

Part Number: MCF8315A
Other Parts Discussed in Thread: MCF8315EVM, , MCF8329A, MCF8316A

Tool/software:

Hi team,

May I ask why the customer cannot choose the Brake_pin_mode based on the MCF8315EVM?(They choose device MCF8315A)

But when they choose the device MCF8329A, they can use the Brake_pin_mode in the GUI.

Thanks!

Regards,

Ivy

1 month ago

+1 Venkatadri Shantaram84961 1 month ago

TI__Expert 6580 points

Hi Ivy,

This feature is reserved and not used in MCF8315A.

Thanks and Best Regards,

Venkatadri S

0 Ivy Jin 1 month ago in reply to Venkatadri Shantaram84961

TI__Intellectual 2845 points

Hi Venkatadri,

Thanks for your comments.

But why the MCF8315A data sheet shows that the BRAKE_PIN_MODE can be configured by the PIN_CONFIG Register?

Regards,

Ivy

0 Venkatadri Shantaram84961 1 month ago in reply to Ivy Jin

TI__Expert 6580 points

Hi Ivy,

I will note it and update the information.

Thanks and Best Regards,

Venkatadri S

0 Ivy Jin 1 month ago in reply to Venkatadri Shantaram84961

TI__Intellectual 2845 points

Hi Venkatadri,

Could you please help check if the MCF8316A can support the brake_pin_mode? The MCF8316A's datasheet shows that it can support the function, but seems like this function is locked on the EVM. The customer needs this function to realize the motor hold.

Thanks.

Regards,

ivy

Motor drivers

Motor drivers forum

MCF8315A: Brake_pin_mode