Hi,
I would like to use TLV3691 IDFPR comparator, but I could not find any footprint recommendations in it's datasheet.
Could someone provide me recommendations or guidelines for footprint design?
br,
Zalan
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I would like to use TLV3691 IDFPR comparator, but I could not find any footprint recommendations in it's datasheet.
Could someone provide me recommendations or guidelines for footprint design?
br,
Zalan
Zalan
I see what you mean, for some reason the landing pattern has been omitted. I will work on finding it for you and get back to you as soon as possible.
Chuck
Zalan
I have not forgotten your request and I am very sorry this is taking so long. I am pushing to get the required information and will update the post as soon as I obtain the PCB landing pattern.
Chuck
Zalan
I finally received the landing footprint (see attachment). This is being routed to the datasheet but that will most likely not be complete until the end of this week.
I believe this closes the actions for this post, so I will close the thread.
Thank you for your patience,