TPS65265: Questions about datasheet

Lindsey Fike

Intellectual 2200 points

Part Number: TPS65265

Please let me know if you can confirm these details from the datasheet-

Page 1 refers to the ‘MODE pin’ for selecting between PSM & FCC modes. Is the MODE pin also multiplexed with this function, or is this just a typo that should be referring to the PSM pin?
The table on Page 19 lists “Connect to high or float” for some rows of the ‘MODE’ pin in the “Automatic Power Sequencing” section, however elsewhere “Floating” is defined for “Externally Controlled Sequencing”. If the former half the piece that is incorrect?

If these were typos can you clarify?

Thanks!

over 3 years ago

0 Ruby Li over 3 years ago

TI__Expert 7430 points

Hi Fike

Thanks for the feedback. I think there is something wrong with the first page, where it should be "PSM" pin to choose the PSM & FCC modes rather than "MODE" pin. "Mode" pin is used to set the power sequence. I will talk with my team and update that.

Ruby

0 Young Zhao over 3 years ago

TI__Genius 9280 points

Hi ,

Sorry that I will close this post first as there is no further concern . You can re-open it if you have any other question .

thanks for understanding .

BRs,

Young

Power management

Power management forum

TPS65265: Questions about datasheet