Hi,
I have a bq34z100-G1 responding to address 0x16 instead of 0xAA. I tried to reprogram it using the srec provided, but it just fails.
What can I do?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I have a bq34z100-G1 responding to address 0x16 instead of 0xAA. I tried to reprogram it using the srec provided, but it just fails.
What can I do?
Hello Paul,
You may have your gauge in firmware mode, you can refer to some other threads for more information: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/759865/bq34z100-g1-flashing-via-microcontroller
Sincerely,
Wyatt Keller
Hello Paul,
There are other threads for how to exit ROM mode: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/911750/bq34z100-g1-golden-image-questions-about-address-register-checksum
Sincerely,
Wyatt Keller