Hello,
My customer has some questions about TPS62866.
Q1:
Looking at Figure 8-1 of the datasheet, VIN rises first then EN ramps.
But, VIN and EN can be connected and they can ramp simultaneously?
Q2:
They would like to confirm tF_VIN spec.
VIN falling slew rate has to be farter than 10mV/us?
Or VIN falling slew rate has to be slower than 10mV/us?
Q3:
If tF_VIN spec is violated, what would go wrong specifically?
Could you elaborate, please?
Best regards,
K.Hirano