Hi Expert,
Customer would to know If the output pin is not connected to the LED, should we leave it floating or connect it directly to GND?
Regards,
Mark
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Expert,
Customer would to know If the output pin is not connected to the LED, should we leave it floating or connect it directly to GND?
Regards,
Mark
Hi Hardy,
Ok thanks., customer would to pull down to ground for some of no use output port.
Regards,
Mark