TPS61096A: Is it possible to share with me the efficiency curve when 5V output.

Koki Tsushima

Prodigy 695 points

Part Number: TPS61096A

Hi experts,

This is Koki Tsushima,

Customer wants to know efficiency curve when 5V output like this.

Is it possible to share with me?

I guess customer wants to use this by 1LiPo so Vin =3~4.5V.

Iout is few mA~ up to 10mA.

Best,

Koki Tsushima

over 2 years ago

0 Eric Yue over 2 years ago

TI__Expert 5180 points

Hi Koki-san,

Sorry that we don't have 5V output efficiency curve because the validation only tested 18V output before. I can test the efficiency based on EVM at customer's required application such as 3.6V input, 5V output, 10mA load. But because of quarantine policy due to COVID, I cannot return to office in short time. Maybe customer can apply for one EVM to evaluate themselves or I can test the efficiency after return to office 10 days later.

Eric Yue

0 Koki Tsushima over 2 years ago in reply to Eric Yue

TI__Prodigy 695 points

Hi Eric-san,

Thank you for your continuous support.

Is it possible to measure now?

BR,

Koki Tsushima

0 Eric Yue over 2 years ago in reply to Koki Tsushima

TI__Expert 5180 points

Hi Koki-san,

As you may know, the COVID situation in shanghai is worse now. I cannot return to office for at least one week. I will test it as soon as I return. Please help get us some more time because of this irresistible factors. Thanks.

Eric Yue

Power management

Power management forum

TPS61096A: Is it possible to share with me the efficiency curve when 5V output.