TPS65266: PMIC suggestion needed

Hi Shifali,

Thanks for coming to us with your queries. Since requirement of Iout1 is changed from 3A to 4A, I think TPS65266 can not support your need now. Could you please help clarify what is the range of Vin?

I will move your post to other forum for best response from the experts who know low-Vin portfolio.

Thanks and please let us know your more about your concern.

BRs

Lucia

Hi Shifali,

Could you please specify the Vin range?

Below 6V operating input voltage, we do not have PMICs but we can offer synchronous buck converters instead. Please let us know.

Regards,

Febin

Hi Lucia Gao,

Thank you for your response.

Minimum Vin requirement for my design is 3.3V

Hi Shifali,

Thanks for your update. What is Vin max requirement? Is PMIC device a must need or can you consider single buck converter solution instead?

Thanks!

BRs

Lucia

Hi Lucia gao,

I don't have Vin max requirement. 

I am designing a board with dual M.2 form factor. Hence I have limitation of the number of components and dimension of components that will be mounted on the board. I am already using a Buck Regulator for core voltage. Hence I am looking for PMIC which can support 3 channel output.

Hi Shifali,

Got you. I will move this post to experts from PMIC team to check whether we have suitable solutions. Thanks for your understanding and patience. 

BRs

Lucia

Hi Lucia Gao,

Experts from PMIC team will reply in the same chain or do I have to create separate case request.

Hi Shifali,

Yes, I have moved this post already to the right forum. You can also create a separate case request as well. 

BRs

Lucia

Hello Shifali,

I will look into our PMIC catalog tomorrow and will let you know if we have anything that fits your needs. Thank you.

Regards,

Alex