Hi Team,
Can I use DFE252012P-2R2M=P2 inductor for TPS63001DRCR design? Please confirm.
regards,
James
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
Can I use DFE252012P-2R2M=P2 inductor for TPS63001DRCR design? Please confirm.
regards,
James
Hi James,
The selected inductor DFE252012P-2R2M=P2 works for this design. Thank you.
Hi Zack,
does this inductor works for both buck (1.2A) and boost(0.8A)?
Conditions: Vin - 3.0V to 4.2V, Vout - 3.3V
Hi James,
Yes, this inductor saturation current spec is 3A, which is enough for both buck and boost mode.