This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC21520: DT pin of the Isolated Gate driver UCC21520

Part Number: UCC21520

As per the Datasheet, if the DT pin is left open:  The default dead time is from 0 to 15ns Maximum.


 Can you confirm that by keeping the DT pin Floating, will set the dead time between OUT A & OUT B to maximum 15 ns.

In my application, I am keeping the DT pin floating,is there any issue in Keeping the DT pin floating.

If yes, what is the consequences.