• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 194 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PMICLOADBOARDEVM: How to adjust slew rate

Liu Yang
Expert 5945 points
Part Number: PMICLOADBOARDEVM

Hi Team,

How can I adjust the slew rate of the load current when I use PMICLOADBOARDEVM?

Best Regards,
Tom

  • +1
    TI__Expert 6440 points

    Hi Tom,

    The PMICLOADBOARDEVM is like voltage controlled current sink. Meaning that that you control the output current by input voltage level and therefore also slew-rate is controlled same way.

    So in practice when you drive 0 - 100 mV voltage signal in 1 µs to input you will get 0 - 2 A load transient in 1 µs on output.

    BR, Jari