• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 145 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC23513EVM-014: Voltage dropped at 100Hz.

Pang
Expert 2395 points
Part Number: UCC23513EVM-014

Hi,

Currently, our customer is facing some issues after evaluating the EVK. Please help to advise whether will higher peak current IC solve this issue.

  1. They found out the Vout dropped from 24V to 21V when they insert the 33Ω output load (around 0.7A) and they need the Vout to be 24V.
  2. Initially, they tested the setup using a function generator is 100Hz but faced issues voltage dropped from 24V to 21V.
  3. They had tested with 100kHz (5us) pulse width and the output voltage was stable at 24V.
  4. The customer's application required longer on/off time of the output as it’s not a switching output type. 

Waveform for 100Hz

Waveform for 100KHz

  • 0
    TI__Guru**** 189399 points

    Hi, Pang,

    Sorry your customer is having difficulty.

    Can you describe the load the customer is trying to drive? This device is designed to drive the capacitive load of the gate of a power transistor. Are they planning to use it to drive a resistive load?

    If you could send a schematic of how the customer is planning on using the device, it would be helpful. Are they planning on driving the load at less than 100 Hz?

    For the waveforms, what two waveforms do the channels represent?

    Best regards,

    Don