• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 176 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSM8D6B24: TPSM8D6C24 drop-in replacement

JH Shin
Mastermind 9575 points
Part Number: TPSM8D6B24
Other Parts Discussed in Thread: TPSM8D6C24

Hello,

If the current capacity is neglected, is it possible to replace only the TPSM8D6B24 in the design circuit of the TPSM8D6C24?

Thank you.

JH

  • 0
    TI__Guru 54350 points

    JH Shin,

    Due to the difference of inductance, it is generally recommended that the TPSM8D6B24 use an ILOOP value 1 higher than that of the TPSM8D6C24 to avoid loss of phase margin in the voltage loop.  The Compensation value is programmed with the MSEL1 resistors.