TPS1HB08-Q1: seems error in datsheet

Elec Cheng

Part Number: TPS1HB08-Q1

Hi Expert,

I see below sentence in datasheet, but from my understanding the EN should be high to enter Standby Delay. Is it wrong in the datasheet? Thanks.

BR,

Elec Cheng

over 1 year ago

0 Shreyas Dmello over 1 year ago

TI__Mastermind 32650 points

Hi Elec,

Please reference Figure 42:

The standby delay state is entered when EN and DIAG_EN go low. After tSTBY passes, then the device transitions to the Standby state. If EN is high, the device is in some form of active state.

Thanks,

Shreyas

Power management

Power management forum

TPS1HB08-Q1: seems error in datsheet