Hi Expert,
I see in datasheet that as below calculation. I suppose the nominal load current for TPS1HB08-Q1 is about 11A, so the worst case is 11A. I don't get how 9.6A comes from. May you help explain? Thanks.
BR,
Elec Cheng
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Expert,
I see in datasheet that as below calculation. I suppose the nominal load current for TPS1HB08-Q1 is about 11A, so the worst case is 11A. I don't get how 9.6A comes from. May you help explain? Thanks.
BR,
Elec Cheng
Hi Elec,
This is with reference to the application circuit for a 130W heater. At 13.5V the maximum current through a 130W heater is:
130/13.5 = 9.629 A
This is separate from the datasheet specification.
Thanks,
Shreyas